Wind turbine blade ultrasonic phased array semi-automatic scanner GS-50
Wind turbine blade semi-automatic scanner GS-50 is a two-dimensional planar semi-automatic scanner using vacuum suction cup adsorption method. It can be used with phased array instruments to detect defects such as disbonding, porosity and inclusions of blades. The vacuum suction cup can firmly adsorb the scanner on the surface of the blade, and complete the grid scanning through the automatically controlled X and Y axes to generate A, B, C, and D scan images. The specially designed probe loading arm adapts to changes in the blade surface profile to ensure good coupling between the probe and the blade surface.
Support customization
Functional characteristics
• Portable control vehicle, integrating control panel, battery, control system, water pump, and vacuum pump;
• One click return to zero, single axis up, down, left, right jog control, and automatic grid control;
• Free switching between axial and radial scanning
• Synchronize water supply with scanning, delay control, and automatically stop water supply after scanning, effectively saving on-site water consumption;
• The configuration of the scanning frame encoder can ensure that the size of the image scanned by the instrument is consistent with the size of the blade scanning area, with an error of less than 1%;
• The battery is equipped with low voltage alarm and temperature control display, and the vacuum unit is designed to be sealed. If there is a power outage, the scanner can be kept on the blade for more than 10 minutes to avoid falling of the tooling and provide reaction time for manual protection;
• The controller can achieve parameter settings for air pumps, water pumps, and scanning, and the flow rate can be controlled in percentage based on the water volume.
风电叶片扫查器检测图像
